MIL-DTL-2845E (SH)
(a)
Serial number (NAVSEA or customer assigned).
(b)
National Stock Number.
(c)
Ship class.
(d)
Weight and cube.
(e)
Condition code of the blade gauges.
(f)
"IF CONTAINER IS DAMAGED, NOTIFY NAVICP 05824, MECHANICSBURG PA."
(g)
"REUSABLE CONTAINER".
(h)
"CENTER OF BALANCE".
(i)
"FORK HERE".
(j)
"DO NOT STACK".
(k)
"STOW FLAT ON CONTAINER SKIDS".
(l)
"CAUTION: THIS SIDE UP" (with arrows).
(m)
"SLING HERE".
3.18 Taper plug and ring gauges. Taper plug and ring gauges shall be
thoroughly cleaned with a petroleum based solvent in accordance with P-D-680
or ASTM D 4376. Gauges shall be completely covered with a preservative in
accordance with MIL-PRF-16173, grade 4. Gauges shall be placed upright in a
box with the centerline of the gauge vertical and the box attached to a skid-
type base. The boxes shall be in accordance with PPP-B-601 (overseas type) or
PPP-B-621, class 2. The skid-type base shall be of a design and construction
format similar to the skid bases specified in MIL-C-104 except that the skid
base will be square and dimensions of the base shall exceed the height of the
container by 6 inches. Wood materials utilized for container and skid
construction shall be as specified in 3.8.2.2 for multiple trip use. Gauge
containers shall be assembled with corrosion resistant (stainless steel)
screws. The container box top shall be attached with hex head corrosion
resistant (stainless steel) screws. The gauge shall be blocked and braced with
reusable, removable partitions to prevent gauge movement during handling and
transportation. A neutral barrier material in accordance with MIL-B-121, type
1, grade A, class 2, shall be applied to all wood surfaces that come in direct
contact with the gauge. A copy of the gauge certification form and visual
inspection report shall be enclosed in a minimum 0.004-inch thick transparent,
waterproof, greaseproof resealable bag (zip-lock or equivalent) to permit
removal and replacement of the certification and visual inspection form. The
bag shall be prominently marked "Certification Form" and placed inside the
gauge container. Gauges shall be stored upright in a warehouse. Gauge
containers shall be marked in 1-inch letters in accordance with MIL-STD-129 /
MIL-HDBK-129 except that wood containers shall be stenciled in all capital
letters. A contrasting color oil based paint shall be applied to the wood
surface prior to stenciling. Gauge container markings shall be as follows;
items in quotations shall be marked exactly as indicated:
(a)
Serial number (NAVSEA or customer assigned).
(b)
National Stock Number.
(c)
Type of gauge (propeller taper plug, shaft taper ring, etc.).
(d)
Ship class.
(e)
Weight and cube.
(f)
"IF CONTAINER IS DAMAGED, NOTIFY NAVICP 05824, MECHANICSBURG PA."
(g)
"REUSABLE CONTAINER".
(h)
"CENTER OF BALANCE".
(i)
"FORK HERE".
(j)
"DO NOT STACK".
(k)
"STOW FLAT ON CONTAINER SKIDS".
(l)
"CAUTION: THIS SIDE UP" (with arrows).
(m)
"SLING HERE".
4.1 Classification of inspections. The inspection requirements specified
herein are classified as follows:
30
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business