INCH-POUND
MIL-DTL-2845E(SH)
18 August 1999
SUPERSEDING
MIL-P-2845D(SH)
17 June 1991
DETAIL SPECIFICATION
PROPULSION SYSTEMS, BOAT AND SHIP; MAIN SHAFTING, PROPELLERS,
BEARINGS, GAUGES, SPECIAL TOOLS, AND ASSOCIATED REPAIR PARTS;
PRESERVATION, PACKAGING, PACKING AND STORAGE OF
This specification is approved for use by the Naval Sea Systems Command,
Department of the Navy, and is available for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the cleaning, drying, preservation,
packing, marking, and storage of main propulsion shafting, line shaft
bearings, stern tube and strut bearings, boat and ship propellers, propeller
devices including controllable pitch propellers, shafting, and accessories
thereto. It also covers repair parts, tools, and independently mounted main
propulsion thrust bearings.
1.2 Levels of protection.
1.2.1 Preservation.
Level A (see 3.5.1.1 and 6.4.1.1).
Commercial (see 3.7.10 and 6.4.1.2).
1.2.2 Packing.
Level A (see 3.8.1 and 6.4.1.1).
Commercial (see 3.8.2.7 and 6.4.1.2).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in
sections 3 and 4 of this specification. This section does not include
documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they
must meet all specified requirements documents cited in sections 3 and 4 of
this specification, whether or not they are listed.
Beneficial comments (recommendations, additions, deletions) and any
pertinent data which may be of use in improving this document should be
addressed to: Commander, SEA 03Q, Naval Sea Systems Command, 2531 Jefferson
Davis Hwy, Arlington, VA 22242-5160 by using the Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document
or by letter.
AMSC N/A
FSC PACK
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business