MIL-DTL-2845E (SH)
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected
to first article inspection in accordance with 4.2.
3.2 Definitions or explanation of packaging terms. Definitions or
explanation of packaging terms applicable to this specification shall be as
defined in the applicable referenced specification (see 6.4).
3.3 Materials. Packaging materials shall be as specified herein and in
the applicable referenced specifications.
3.3.1 Recycled, recovered, or environmentally preferable materials.
Recycled, recovered, or environmentally preferable materials should be used to
the maximum extent possible provided that the material meets or exceeds the
operational and maintenance requirements, and promotes economically
advantageous life cycle costs.
3.3.2 New materials. The use of newly developed packaging materials or
procedures is encouraged and recommended and will be permitted under the
conditions specified herein, provided they are equal to or better than the
specified materials or procedures.
3.3.2.1 Certification of new materials. Materials or procedures other
than those specified herein shall equal or exceed the requirements specified
herein. If, after a review of the material or procedure and the related
documented evidence, or the witnessing of the stipulated tests, it is the
opinion of the contracting activity that the material or procedure meets or
exceeds the requirements specified herein, authorization for use will be
granted.
3.3.3 Asbestos.
3.3.3.1 Packaging material. Asbestos or material and items containing
asbestos shall not be used in the packaging of material covered by this
specification (see 6.5).
3.3.3.2 Packaged items. Asbestos and separately packaged components
containing asbestos shall be packaged in sealed, dust, and siftproof packages.
Flexible packages shall be heat sealed.
3.3.3.3 Dusting material. Talc or talcum, when used in the packaging
process, for example, dusting of items, shall be asbestos-free.
3.3.4 Cushioning and wrapping materials. The use of excelsior,
newspaper, shredded paper (all types) and similar hygroscopic or nonneutral
materials, and all types of loose fill materials for applications such as
cushioning, fill, stuffing, and dunnage is prohibited.
3.4 Technical information. Complete descriptive packaging details on
drawings, test results, and packaging, and transportation data requirements
are not required when such were previously approved by the contracting
activity.
3.5 Levels of protection.
3.5.1 Preservation. Unless otherwise specified (see 6.2), preservation
shall be level A as specified in 3.5.1.1 (see 6.4.1).
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business