MILDTL19491J
3.1.5 Civil agencies. When specified in the contract or order (see 6.2), the marking of domestic shipments for civil
agencies shall be in accordance with FEDSTD123.
3.1.6 First article and conformance inspections. First article and conformance inspections and tests shall be
required as specified in 4.4 and 4.5, respectively. Samples for these tests shall be furnished in accordance with the
procedures outlined in 4.4 and 4.5. The performance of the visual and dimensional inspections, rough handling tests,
and leakage tests shall conform to the inspections and tests outlined in 4.6.1, 4.6.2.1, and 4.6.2.2, respectively.
3.1.6.1 Functional requirements.
3.1.6.1.1 Rough handling test (when specified, see 6.2). When packs have been tested in accordance with
4.6.2.1, all material and components comprising each pack shall be free from damage or evidence of displacement,
which might affect the use of the preservation method or pack. The semiconductor devices and associated
accessories within the tested packs shall show no visible signs of damage. When specified in the contract or order
(see 6.2), functional tests in accordance with the group A inspection requirements of the commodity specification
shall be conducted on those semiconductor devices subjected to the rough handling test to determine freedom from
operational malfunction. The examination of the devices tested under this group A inspection shall be in accordance
with the visual and mechanical inspection requirements specified in test method 2071 of MILSTD750 or the
commodity specification.
3.1.6.1.2 Leakage test (when applicable). When a barrier enclosed unit pack has been tested in accordance with
4.6.2.2, there shall be no evidence of moisture within the unit pack.
3.2 Shipments to non-Government activities.
3.2.1 Non-ESDS semiconductor devices. Shipments to original equipment manufacturers (OEM) and packaging
distributors shall be in accordance with ASTM D3951.
3.2.2 ESDS semiconductor devices. Shipments of ESDS semiconductor devices to OEM's and packaging
distributors shall conform to the requirements specified 3.1.1.5.
3.2.2.1 Packaging material surface resistivity. Tape and reel, waffle pack, and other type carriers used in
packaging shall have a surface resistivity of less than 1012 ohms per square.
3.2.2.2 Container. Tape and reel, waffle pack, and other type carriers used in packaging, if required, shall be
placed in a bag conforming to MILDTL117, type I, class F, style 1 using barrier material conforming to type I or III
of MILPRF81705 as specified (see 6.2.2).
3.3 Recycled, recovered, environmentally preferable, or biobased materials. Recycled, recovered,
environmentally preferable, or biobased materials should be used to the maximum extent possible, provided that the
material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous
life cycle costs.
3.4 Workmanship. The quality of workmanship shall assure acceptance of the completed preservation, packing,
and marking requirements in accordance with the inspections specified in section 4 herein.
4. VERIFICATION
4.1 Classification of inspections. The inspections specified herein are classified as follows:
a.
Materials inspection (see 4.3).
b.
First article inspection (see 4.4).
c.
Conformance inspection (see 4.5).
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business