MIL-DTL-62220C
3.4.1.4 Packaging. Unless otherwise specified (see 6.2), each Disassembled, Component
and Support Item shall be packaged in accordance with MIL-P-116 for the method specified in
Table I, Table II and Table III (see 4.4.2.1). The cartons used for unit packaging shall conform to
ASTM D5118/D5118M, type CF, class WR, grade V3c, and shall be of the style listed in
Table I, Table II and Table III. Sufficient blocking/bracing and cushioning shall be used within
the containers to prevent damage during shipping and handling. The bags used for unit packaging
shall conform to MIL-B-117, type I, class B or C, style 1 or 2. The wrapping material shall
conform to MIL-B-121, type I or II, class 2, grade A or C. Cushioning material shall be either
type II, class 1, of PPP-C-1797 or type II of A-A-1051 as specified.
3.4.1.4.1 Batteries, connecting cables, and electrolyte. Batteries, connecting cables and
battery electrolyte shall be processed in accordance with the specified level of protection
(see 3.4.2 for special requirements).
3.4.1.5 Packing. Unless otherwise specified (see 6.2), each Disassembled, Component
and Support Item shall be packed as specified in Table I, Table II and Table III. Exterior shipping
containers shall conform to PPP-B-621, class 2, as shown in Figure 8 through Figure 15.
Blocking, bracing, cushioning, and immobilization of the items within the shipping containers shall
meet the requirements of MIL-P-116.
3.4.1.5.1 Access covers. The access covers shall be packed in Weather Resistant boxes
conforming to ASTM D5118/D5118M and sealed according to ASTM D1974.
3.4.1.5.2 Access cover gaskets. The gaskets used on the access covers shall be preserved
in accordance with method IC of MIL-P-116. The bagged gaskets shall be packed into a Weather
Resistant box conforming to ASTM D5118/D5118M and sealed according to ASTM D1974.
The hardware used to secure the access covers shall be packed into a weather resistant box
conforming to ASTM D5118/D5118M and sealed according to ASTM D1974.
3.4.1.5.3 Eye bolts. The removed eye bolts shall be wrapped together in one piece of
barrier material conforming to MIL-B-121. The wrap shall be secured with tape.
3.4.1.5.4 Radio antenna. The radio antenna with attached bracket shall be cushioned with
PPP-C-1797 and placed into a weather resistant box conforming to ASTM D5118/D5118M and
sealed according to ASTM D1974.
3.4.1.5.5 Drain plugs. The drain plugs shall be combined into a bag conforming to
MIL-B-117 and closed by stapling, taping or heatsealing.
3.4.1.6 Marking. In addition to any special marking required herein or in the contract or
order (see 6.2), vehicles shall be marked in accordance with MIL-STD-129 (see 4.4.3).
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business