PPP-C-2020A
assure that the fiber drum cavity is completely filled and all motion of the liner within the drum is prevented.
3.2.1.3 Commercial. Unregulated chemicals shall be preserved in containers in compliance with Uniform Freight Classification and National Motor Freight Classification rules, ASTM D
3951, and any other applicable regulatory requirements in a manner that will preserve the speci-
fied purity of the chemical in containers that will retain integrity from the supply source to the first receiving activity and for the normal shelf life of the chemical.
3.2.2 Intermediate packing.
3.2.2.1 Level A. Level A unit packs shall be intermediately packed as specified in table IV. Unit packs of the same type and size, and containing the same chemical shall be snugly interme- diately packed with closures on top in the applicable configuration specified in table V.
Unit containers of less than 2 fluid ounces (59 milliliters) or 2 ounces avoirdupois (57 grams) shall be first snugly arranged in a box conforming to variety 2, process II, style optional of PPP-B-566 in a three by four pattern, in cells formed from partitions of the same material as the box. Twelve of these 12-unit boxes shall then be placed upright in a fiberboard box conform- ing to a weather-resistant, conventional style box of UFC Rule 41 or grades optional of PPP-B-636 and arranged in three layers, with each layer consisting of four boxes in a two by two pattern.
Protective materials used in level A, intermediate packing, such as pads, liners, partitions, and separators, shall be of the same material as used for the box. Full-height partitions shall be used to provide a snug-fitting cell for each unit (not applicable to containers of less than 2 fluid ounces (59 milliliters) capacity). Full-height liners shall be used for all four sides of the box. Full size top and bottom pads shall be used. Separators shall be placed between layers of unit containers. Protective pads shall be placed over protruding closures and handles. The boxes shall be provided with cushioning material conforming to type I, class B of PPP-C-843 or fiber- board pads and with snug-fitting slotted partitions. A sufficient amount of the non-reactive cushioning material shall be provided to completely absorb the liquid contents of the unit con- tainers in the event of breakage except when type I, class 1 containers are in enclosures A, B, or C as specified in 3.2.1.1.1. Paperboard folding and fiberboard boxes shall be closed in accordance with the appendix of the applicable box specification.
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business