MIL-STD-107 Preparation And Handling Of Industrial Plant Equipment Ipe For Shipment And StorageThis standard provides both general and detailed requirements and approved methods for preparing Government-owned industrial plant equipment IPE for shipment or storage. General requirements have been provided to cover processes such as equipment disassembly, cleaning, weatherproofing, and skidding. Detailed requirements covered in this standard include methods of preservation and packing protection for specific IPE components.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33

MIL-STD-107J

1. SCOPE

1.1 Scope. This standard provides both general and detailed requirements and approved methods for preparing Government-owned industrial plant equipment (IPE) for shipment or storage. General requirements have been provided to cover processes such as equipment disassembly, cleaning, weatherproofing, and skidding. Detailed requirements covered in this standard include methods of preservation and packing protection for specific IPE components.

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4, and 5 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements documents cited in sections 3, 4, or 5 of this standard, whether or not

they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation (see 6.2).

SPECIFICATIONS FEDERAL

A-A-52624 - Antifreeze, Multi Engine Type.

A-A-59136 - Cushioning Material, Packaging, Closed Cell Foam

Plank.

MMM-A-260 - Adhesive, Water Resistant, (for Sealing Waterproofed

Paper).

PPP-B-1055 - Barrier Material, Waterproofed, Flexible.

PPP-C-1797 - Cushioning Material, Resilient, Low Density, Unicellular, Polypropylene Foam.

DEPARTMENT OF DEFENSE

MIL-PRF-121 - Barrier Materials, Greaseproof, Waterproof, Flexible, Heat-Sealable.

MIL-DTL-197 - Packaging of Bearings, Antifriction Associated Parts and

Subassemblies.