MIL-DTL-197L
SAE INTERNATIONAL - Continued
SAE AS81936
- Bearings, Plain, Self-Aligning (Cu-Be Ball, CRES
Race) General Specification For
(Copies of these documents are available online at https://www.sae.org or from SAE
International, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event
of a conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 General. This procedural document provides the detailed preservation and
packaging requirements for bearings, associated parts, and subassemblies. Many of the methods
of preservation described herein have been derived from MIL-STD-2073-1. However, the
methods specified in this document have been tailored to meet the necessary requirements for the
proper protection of bearings. Consequently, the methods specified herein are not identical to
apply in performing all methods of preservation in accordance with this document.
3.1.1 Hazardous material. Packaging of hazardous material shall comply with the
applicable requirements contained in Code of Federal Regulations (CFR) Titles 29, 40, and 49.
Hazardous material shipment documentation shall be provided with the shipment as required.
3.1.1.1 Ozone depleting substances (ODSs). ODSs shall not be used in the performance
of the methods or procedures described in this specification.
3.1.2 Loose fill materials. Loose fill materials are prohibited in all military packages.
3.1.3 Facilities. Bearings shall be packaged and preserved in facilities that meet the
requirements of this document.
3.1.4 Transfer to a subcontract packaging facility. The following procedure, as specified
facility to a subcontract packaging facility:
3.1.4.1 Required information. The packaging facility shall be provided all the necessary
information that includes and clearly defines the type bearings and degree of preservation/
packaging required in accordance with this specification. This is to include complete
identification of embedded lubricants as may have been applied by the manufacturer during
production to meet government contract requirements. When bearings are provided to the
packager with required lubrication or an acceptable contact preservative compound applied, and
also protected in manufacturer's intimate packs meeting requirements of this specification, this
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business