FED:STD:123H
August 8, 2007
SUPERSEDING
FED: STD: 123G
June 6, 1997
FEDERAL STANDARD
Marking for Shipment (Civil Agencies)
The General Services Administration has authorized the use of this federal
specification by all federal agencies .
1. SCOPE: This document establishes requirements for marking unit ,
intermediate and transport packages, and unit loads. Packaging and marking
terms related to requirements herein are clarified in section 3.
2. REFERENCE DOCUMENTS: The following documents form a p art of this
description to the extent specified herein. Unless a specific issue is
identified, the issue in effect on the date of invitation for bids or request
for proposal shall apply.
ASTM D 5445, Standard Practice for Pictorial Markings for Handling o f Goods.
Application for copies should be addressed to AST M International, 100 Barr
Harbor Drive, W. Conshohocken, PA 19428 , www.ASTM.org.
ISO/IEC 16388 : Information Technology : Automatic Identification and Data
ANSI X3.182: (R95/R00): Barcode Print Quality Guideline
: Applications for ISO or ANSI copies should be addressed to American
National Standards Institute, Washington, DC. Headquarters, 1819 L
Street, NW. 6th floor, Washington, DC 20036,
https://www.ansi.org or
www.iso.org.
MHIA, MH10.8.1: Linear Barcode and Two-Dimensional Symbols Used in Shipping,
Receiving and Transport Applications . www.mhiastore.org . MH10.8.1: 2000
DoD 4500.9-R Defense Transportation Regulati ons Part II, Cargo movement.
Office of Public Affairs, United States Transportation Command, Scott Air
Force Base, IL 62225:5357, www.transcom.mil .
MIL-STD-129 DoD Standard Practice for Military Marking For Shipm ent &
Storage Document Automation and Production Service, Building 4/D, 700 Robbins
Avenue, Philadelphia, PA 19111 :5094 or https://assist.daps.dla.mil/online .
FSC: PACK