MIL-DTL-55507F(CR)
4.
VERIFICATION
4.1 Quality conformance inspection Quality conformance inspection of Section
.
3 requirements shall be in accordance with the applicable provisions of ASTM D 4169 or
MIL-STD-2073-1. Inspection lots shall be in accordance with ASQC-Z1.4.
4.1.1 Materials inspection All materials to be used in packaging shall be
.
inspected in accordance with the applicable material specification.
4.1.2 Preservation inspection Inspection of preservation and interior
.
markings shall be in accordance with MIL-STD-2073-1, MIL-STD-129, and MIL-HDBK-129, as
applicable. Lot formation shall consist of all packs made of the same materials during
an identifiable period and submitted at one time for acceptance. Sampling procedures
shall be as specified in ASQC-Z1.4.
4.1.3 Packing inspection Inspection of packing and the marking for shipment
.
and storage shall consist of the examinations specified in Table I, "Packing inspection
provisions." Lot formation shall consist of all packs made of the same materials
during an identifiable period and submitted at one time for acceptance. Sampling
procedures shall be in accordance with ASQC-Z1.4.
TABLE I. Packing inspection provisions
.
METHOD OF
NO.
CHARACTERISTIC
INSPECTION
101
Intermediate container not as specified
Visual
102
Improper closure of intermediate container
Visual
Shipping containers not in accordance with
103
specification
Visual
104
Excessive cube
Visual
105
Improper blocking and bracing
Visual
106
Closure not in accordance with specification
Visual
Weight and
107
Weight and size exceed container limitations
Measure
Strapping not in accordance with specification,
108
incorrectly applied, omitted
Visual
109
Marking omitted, incorrect, or illegible
Visual
5.
PACKAGING
5.2
Packaging
.
Not applicable to this specification.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business