INCH-POUND
MIL-DTL-12000K
6 September 2012
SUPERSEDING
MIL-DTL-12000J
29 September 2004
DETAIL SPECIFICATION
CABLE, CORD, AND WIRE, ELECTRIC, PACKAGING OF
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers requirements for the preservation, packing,
packaging, unitization, and marking of electric cable, cord, and wire for domestic and overseas
storage and shipments.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of
this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification,
whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to
Chief, LOGSA Packaging, Storage, and Containerization Center, ATTN: AMXLS-AT-P,
11 Hap Arnold Boulevard, Tobyhanna, PA 18466-5097 or e-mail toby.pt@us.army.mil.
Since contact information can change, you may want to verify the currency of this address
information using the ASSIST Online database at https://assist.dla.mil.
AMSC N/A
AREA PACK
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business