MIL-DTL-39032E
3.2.2 ESD sensitive resistors. Shipment of ESD sensitive resistors to OEM's and packaging
distributors shall conform to the following requirements as shown in table III.
3.2.2.1 Packaging material surface resistivity. Tape and reel, waffle pack, and other type carriers used
in packaging shall have a surface resistivity of less than 1012 ohms per square inch.
3.2.2.2 Container. Tape and reel, waffle pack, and other type carriers used in packaging, if required,
shall be placed in a bag conforming to MIL-B-117 (type I, class A, style 2 or class F, style 1) using barrier
material conforming to MIL-PRF-81705 (type I, II, or III) as specified (see 6.2.2).
3.3 Recycling, recovered, or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible provided that the
material meets or exceeds the operational and maintenance requirements, and promoted economically
advantages life cycle costs.
3.4 Workmanship. The quality of workmanship shall assure acceptance of the completed preservation,
packing, and marking requirements in accordance with the inspections specified in section 4.
4. VERIFICATION
4.1 Classification of inspections. The inspections specified herein are classified as follows:
a. Materials inspection (see 4.2).
b. First article inspection (see 4.3).
c. Conformance inspection (see 4.4)
4.1.1 Inspection conditions. All inspections shall be performed in accordance with the test conditions
specified in the "General Requirements" of MIL-STD-202.
4.2 Materials inspection. Materials inspection shall consist of certification supported by verifying data
that the materials used are in accordance with the applicable requirements specified herein.
4.3 First article inspection. When specified (see 6.2), first article inspection shall be performed by the
contractor, after award of contract and prior to production, at a time and location acceptable to the
Government. First article inspection shall not be required:
a. When there have been no changes in materials, processes, or packaging design that will
adversely affect item protection since the last recorded inspection.
b. When detailed packaging instructions are furnished by the acquisition activity.
c. When commercial packaging is specified.
d. When a prior successful inspection was conducted on a like item and pack (subject to the approval
of the administrative contracting officer).
4.3.1 Sample size. One sample unit consisting of military level A or level B, as applicable, fully packed
shipping container shall be submitted for first article inspection. The sample for the rough handling test
shall consist of the pack selected for first article inspection. The sample for the leakage test shall be five
unit packs selected at random from the first article exterior pack (shipping container).
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business